A MUST HAVE!

If you want bigger screws,simply put a note in with your payment and we will ship you bigger screws,We suggest this only if your screws are stripped out..

What your looking at is a permanent fix for your broken plastic hinges,these are stainless with stainless screws and something others dont have,stoppers,so your lid dont flop all the way open.. 

These are not available from anywhere else or at cruzin cooler but they lign right up to your existing holes,,perfect fit with no modifocation needed..A must have..52 series you will have to shim the back so we suggest keeping the stockers.

Kit includes- 

2 custom stainless steel hinges 
8 stainless steel screws 

Fast Scooters Makes them fast and last! 

If your looking at this ad then your cruzin cooler has rusted screws or the cup holder hinge is broke..These fit but do not lign up to the old holes so you set it in as pictured and simply run the supplied screws threw and your done. 


If you purchased stainless steel lid hinges then this is a must do.. 

These are stainless steel and come with stainless screws..They work and look much nicer than the stock style.. 

Cruzin cooler upgrades Stainless steel strap and oversized stainless screws.. 

If you have a seat then your lid strap is broke or about to break..Even without a seat the standard plastic lid strap gets brittle and breaks.. 
We could upload a video showing how we can pick up a whole cooler with this strap but what good would that do when the strap is screwed into plastic..What i can say is we warranty our straps for the life of your cooler..Unlike others we use a double clamp system without the use of a eye end..This means its one piece ran threw twice and clamped down..Impossible to break! 
Simply remove your old brittle strap and screw this one on and NEVER worry about a floppy lid again..At this price you could ad 2,one in the front and one in the back which works even better!

This is a simple Cruzin Cooler upgrade that you can do that will give you a quick 2 mph+ gain on top end that requires simply removing the sprocket off of your motor and sliding this one on..Very easy to do and it will help get the slack out of your chain..Will fit all Cruzin Cooler from 300 watt up!

In some cases you may need to ad a half link depending on your chains slack but no fear we have those also!

Questions about anything just call

941-404-5915

This is what may be needed to install our 13 tooth sprocket..Its good to have and can be used as a master link being its held on with a cotter pin..If you want a master link instead,just send a note..

We are cruzin cooler junkies that enjoy these coolers to the fullest but as you may notice they are not perfect and need some upgrades and thats where we come in.. 

This listing is for 1 new exact replacement brake handle for your cruzin cooler..These are not from cruzin cooler,they are a much better brake handle that gives you 1 inch more stopping power which as you know is needed.. 

In the pictures you can clearly see you gain about 1 inch more stopping power which helps alot. 

These are a exact fit for ALL 50 series cruzin coolers,if you own a 51 series you need to simply butt connect it in,red to red,black to black.. 

If you have a bad brake switch or your wanting a little more stopping power,then this is for you.. 

Simple to install,any problems just call.. 

941-404-5915 

Fast Scooters makes your Cruzin Cooler scooter fast and last. 

Here is a brand new Fast Scooters rear caliper with new pads installed and ready to bolt on..Also comes with new nut and bolt to attach brake cable to. 

Exact fit and easy to install,simply remove the 2 alen head screws but remember where the washer spacers went..remove brake cable and reinstall.. 

Any questions just call 941-404-5915

Fast Scooters makes your Cruzin Cooler scooter fast and last. 

Here is a brand new Fast Scooters brake cable..



Any questions just call 941-404-5915

Fast Scooters makes them fast and last!  

If you have had your cooler for a few years and its seen rain then most likely your bearing are wore out, rusted out or coming apart internally....Simply lift your cooler off the ground and spin the steering side to side if you can hear it then your bearing are bad or going bad. 

Unlike Cruzin Cooler we supply everything new including the chrome sleeves/housings for the bearings..Whats pictured is what you get.. 

All chromed and greased ready to go..you could ad a little extra grease if you'd like before the install. 

Questions simply call 
941-404-5915 

Got the Cruzin Clickin blues? 
Fix it! 

This is for one new rear Completly Sealed wheel bearing,these are not from cruzin cooler but they are a exact fit and they actually last! 

The rear right inner bearing goes bad all the time,replace it with a better quality and get back to cruzin. 

This is for 1 bearing that fits both rear,inner and outer..

Need help installing,questions or tips just call me.. 

941-404-5915

This listing is for 1 upgraded breaker switch for the 300,500 & 750 watt..This is not from Cruzin Cooler so you wont receive the same cheap one it came with.. 

We sell what works and these work.. 
You will receive 

1 heavy duty exact fit breaker 
2 spade connectors to connect it.. 

Exact fit,no drilling needed! 

Questions? 
941-404-5915